PrestaShop Documentation v1.5-og体育

Custom modules and extensions

JX Wishlist

JX Wishlist module is created to give the ability to the visitors of online store to add products to wishlists and share these wishlists on Facebook.

Module Installation

То install the module navigate to Admin panel -> Modules -> Modules and Services, find the JX Wishlist module and press 'Install' button (1).

Module Configuration

After the module has been installed, the 'Settings' page will appear.
Add the Facebook App Id to the required field (1) and press 'Save' button (2).
The instruction how to get the Facebook App Id can be found here: Creating an App ID.

Using JX Wishlist Module

Adding product to wishlist

Shop visitors should be logged in to be able to add the items to the wishlists.

After the module is installed, the button 'Add to wishlist' appears on each product page. It should look like on the screenshot below (1).
After clicking this button a shop visitor will see a notification: 'The product was successfully added to your wishlist.' It can be closed or skipped to wishlists view by clicking 'My wishlists' button (2).

Browsing Wishlists

On 'My Wishlists' page a client can add the new wishlist (1) or view the list of created ones (2).
Clicking 'View wishlist' button (1) will open the wishlist page, the 'View products' button (2) gives the ability to see the products list of this wishlist on current page.
The title of wishlist can de edited (3) or deleted (4).
To share the wishlist the visitor should press the 'Share' button (5).
While looking through the items in wishlist after clicking 'View products' button, each item can be removed from the list (1).

Sharing Wishlists

To share the wishlist the visitor should press the 'Share' button. There will be a few easy steps to follow before posting the wishlist. During each step there's an ability to go back and change the sharing options.

First step is to choose the layout for wishlist that will be posted.
Then the products should be added. Each cell with a '+' is a button to add the product image.

Choosing the images of each product:
When all images are added, the visitor should press the 'Share' button (1).
In a small window which is then appeared, there will be some standard posting options to choose and the ability to add some text to the post. After clicking 'Post to Facebook' button, the post will be published.

Statistics

Using this module you can also get the statistics collected while the products are added to wishlists. Thus, you will know which products are currently popular. This information can be very useful for suggesting a discount, for example.
You can view the statistics navigating to Admin panel -> Stats -> Stats -> JX Wishlist.

You can select the period for viewing the statistics from the specified time (1).
In the first column there's a number of product addings (2).
The second column is created for your convenience. You can use it to see how many of added products were sold (3).

TM 360 View

The module displays images in a 3D effect and enables users to rotate them in 360 degrees. The rotation can start automatically on page load, or the client can rotate the 'image' manually, dragging the left mouse button.

Moreover the module can be used for adding panorama view (or several panorama views) to the homepage.

360 view mode is also available on product page.

Installation

Navigate to Modules -> Modules and Settings in your admin panel and find the TM 360 view module. Then click the 'Install' button (1).

Module configuration

After the module has been successfully installed you'll see the 'Configure' page with the default module settings.

You can find here settings for 360 view (1) and for panorama view (2).

360 view

The settings are described below the screenshot. Choose them according to your needs and click the 'Save' button (1).

Enable on Home - option to show the 360 view of the product on Homepage.
Select a product(appears if 'Enable on Home' is set to 'Yes') - choose a product which should be displayed in 360 view.
Animate - option to display the product automatically rotating on page load.
Frame time(appears if 'Animate' is set to 'Yes') - time period before one image in the set will be changed to another; should be entered in milliseconds.

Adding/removing images

Navigate to Catalog -> Products in your admin panel (1), choose the product and click the 'Edit' button (2).
To add images, choose Modules tab (1) and click on the 'TM 360 view' module(2)
Click 'Add files' button (1).
Then press 'Upload files' (1).
When the files were uploaded successfully, click the 'Save' button (1).

To make the rotation smooth, add more images and make a very slight change in position while making photos.
After you've added image pictures, the product 360 view will be shown on the Homepage *.
*It will also appear on the product page after the description.
To disable 360 view on the Homepage, simply go to 360 view settings and switch the 'Enable on Home' option to 'No'.
To disable 360 view on the product page, open the 'TM 360 view' tab in product settings and remove all images.

Panorama

Using this module is also used for adding panorama view to the Homepage.

You can add as much panorama blocks as you need.

Adding panorama

To add new panorama open the module configuration page and click '+' ('Add new item') button (1).
You'll see the panorama settings which are described below.
- Select a file - choose a panorama filed; this field is required (at least for the default language).
- Title - enter a title for the panorama; this field is required (at least for the default language).
- Width - panorama block width; this field is required.
- Height - panorama block height; this field is required.
- Status - enable/disable panorama item on Homepage.
- Loop - start rotating the image from the beginning after it's end.
- Animate - option to display the panorama automatically rotating on page load.
- Frame time(appears if 'Animate' is set to 'Yes') - time period during which the panorama image makes a full circle; should be entered in milliseconds; this field is required.
Click the 'Save' button and your panorama image will appear on the Homepage.

Removing panorama

To remove the panorama - choose the item, click the arrow down button (1) and then click 'Delete' (2).
Then confirm the deleting.

TM Categories Badges

This module allows to add badges to the sidebar categories of the default Prestashop Categories module ("Blockcategories"). The badges can be added to the category of any level and in any language. The text field of the label is mandatory and should be filled in all languages. If this field is left blank in any language, then it will automatically take the text of the default language.

Installation and Deleting

The module is installed and deleted like any other Prestashop module.

Module Configuration

After installation you can change its settings on the module configuration page.

You can add badges to any category after selecting it from the drop down list.

Attention! You can add only one badge for each category.

Then, you can add text that will show up in the badge and select the style from the drop-down list (the styles may differ in different templates).

Then press the 'Save' button (1).

You can see the list of existing badges below. Here you can edit or delete badges with the help of corresponding buttons.

The module is multilanguage and supports multi-stores. You can add badges for group of stores or all stores at once. They will show up in the list as separate elements.

TM Category Image Slider

Module allows creating multilingual slides for any category of the store. Slider will be displayed on the category pages.

Installation and Removal

The installation procedure is standard, module can be installed and deleted as a regular PrestaShop module.

Module settings

After the module installation, you can set or change the needed options on the module configuration page.

Mode - type of animation (fade, vertical, horizontal).
Speed - animation speed.
Width - slides width (for the correct view, it is recommended using the actual image width).
Height - slides height (for the correct view, it is recommended using the actual image height).
Auto - autoplay when page is opened.
Pause - time before transition to the next slide.
Auto Hover - pause on hover.
Controls - "Next"/"Previous" buttons.
Next Text - "Next" button text.
Prev Text -"Previous" button text.
Auto Controls - "Play"/"Pause" buttons.
Pager - pagination.

Adding/removing/editing slides

After the module installation, you will see the new field 'Slides' in category settings.

To add a slide, click on the 'Add new slide' button. Fill in the needed fields in the form.

Select a file - select your file. You can upload different images for each language. In case there is no image selected for the specific language, images set for default language will load.
Enter Slide title - type in the slide title.
Enter Slide Url - provide the slide URL.
Enter Slide caption - type in the slide caption.
Open in new window - open in new window.
Status - enable/disable slide.

When the slide is saved, it will appear in a category slides list.

In order to make changes to slide, click the 'Edit' button.

In order to delete the slide, click on 'Delete' below the 'Edit' button.

Slides can only be added to saved categories.

TM Category Products 2.0.0

This module displays category products in displayHome and displayHomeTabContent hooks. The module allows displaying single products, products from a category or all products. Moreover, the module comes with a carousel that works, when the module occupies the displayHome position.

TM Category Products Main Panel

The main panel. Here you can set up the module.

Adding a block

This block allows selecting products in displayHome position.

Access the module main panel and press the 'plus' (1) button in the blocks list.
In the appeared form, you'll find the following options:
- Status - this option allows enabling/disabling the block.
- Select category - the category, products of which will be displayed.
- Use custom name - this option allows changing the displayed category name. If enabled, displays the following form:
  - Name - the custom tab name, displayed on the website.
- Select products to display - if disabled, displays the 'Number of products to display' field, which sets the number of products to display. If disabled, displays the 'Add products' button that allows selecting products to display in the tab.
- Use carousel - this option allows enabling/disabling the carousel for block products. After enabling the option, you'll see the following settings:
  - Visible items - the number of visible items.
  - Items scroll - the number of items changed with one carousel scroll.
  - Slide Width - the carousel list item width.
  - Slide Margin - the carousel list item margin.
  - Auto scroll - auto scroll of carousel items.
  - Carousel speed - speed of changing items.
  - Pause - pause between scrolls (if "Auto scroll" is enabled).
  - Random - the carousel starts with a random item.
  - Carousel loop - the loop: when all the carousel items have been displayed, carousel starts from the beginning.
  - Hide control on end - hide control buttons (Next/Prev).
  - Pager - display pagination.
  - Control - display controls (Next/Prev).
  - Auto control - display controls (Play/Pause).
  - Auto hover - carousel pauses, if the user hovers a list item.
After configuring all the needed options, press the 'Save' (2) button.

Blocks Sorting

You can sort the blocks of the module with the help of drag'n'drop. This allows to change blocks positions quickly.

Selecting Products

If you create an item and enable 'Select products to display' option, you can choose the products that you want to display. To do this:

Press the 'Add products' (1) button:
In the appeared pop-up, select the needed products (2) and press the 'Add' (3) button:
Now, you can place the added products wherever you want with the help of drag'n'drop (4):
When all the needed products are added and arranged in the desired order, press the 'Save' button.

Deleting Blocks

To delete items, press the drop-down menu next to the needed block (1) and press delete (2). The item will be deleted.

TM Collections

TM Collections module is created to give the ability to the visitors of online store to add products to collections and share these collections on Facebook.

Module Installation

То install the module navigate to Admin panel -> Modules -> Modules and Services, find the TM Collections module and press 'Install' button (1).

Module Configuration

Using TM Collections Module

Adding product to collection

Shop visitors should be logged in to be able to add the items to collections.

After the module is installed, the button 'Add to collection' appears on each product page. It should look like on the screenshot below (1).
After clicking this button a shop visitor will see a notification: 'The product was successfully added to your collection.' It can be closed or skipped to collections view by clicking 'My collections' button (2).

Browsing Collections

On 'My Collections' page a client can add the new collection (1) or view the list of created ones (2).
Clicking 'View collection' button (1) will open the collection page, the 'View products' button (2) gives the ability to see the products list of this collection on current page.
The title of collection can de edited (3) or deleted (4).
To share the collection the visitor should press the 'Share' button (5).
While looking through the items in collection after clicking 'View products' button, each item can be removed from the list (1).

Sharing Collections

To share the collection the visitor should press the 'Share' button. There will be a few easy steps to follow before posting the collection. During each step there's an ability to go back and change the sharing options.

First step is to choose the layout for collection that will be posted.
Then the products should be added. Each cell with a '+' is a button to add the product image.

Choosing the images of each product:
When all images are added, the visitor should press the 'Share' button (1).
In a small window which is then appeared, there will be some standard posting options to choose and the ability to add some text to the post (1). After clicking 'Post to Facebook' button (2), the post will be published.

Statistics

Using this module you can also get the statistics collected while the products are added to collections. Thus you will know which products are currently popular. This information can be very useful for suggesting a discount, for example.
You can view the statistics navigating to Admin panel -> Stats -> Stats -> TM Collections.

You can select the period for viewing the statistics from the specified time (1).
In the first column there's a number of product addings (2).
The second column is created for your convenience. You can use it to see how many of added products were sold (3).

TM Deal of the Day

This module allows you to display the list of products with the discount countdown timer. You can also add a timer to products in the home page tabs, on the category pages and single product pages.

Installation and Deleting

The module is installed and removed the same way as any other PrestaShop module.

Module Settings

After module installation you can add a product discount with the display period and a discount countdown timer.

Adding/removing/editing blocks

In order to add a new product, press 'Add new' button
- Select a product - select a product to apply the discount and display a timer.
- Status - item status.
- Start Date - start date of the product discount period.
- End Date - end date of the product discount period.
- Label - product label.
- Discount price - discount price (absolute or percentage value).
After saving the item it appears in the list of items of this type.
In order to edit this item, press 'Edit' button.
In order to remove this item, press 'Delete' button.
If a special price valid for a certain period was set to the product previously, this product can be added to the module items list.

Product display configuration

In order to change product display mode, press 'Configuration' button.
Then a form with product display configuration will appear.
- Products to display - number of products to display in the home page block.
- Random products - random products display.

TM Google Map

This module allows adding Google Map with store locations and store short descriptions to the Homepage. The map will display the addresses of all the stores connected with your online store.

Installation and removal

The module is installed and removed as any other PrestaShop module.

Module settings

After installing the module, you can add stores to the map. After pressing the 'Add new store' button (1), you'll be redirected to the 'Store contacts' tab, where you can edit your stores.

To add a new store, press the 'Add new' button.

Select a store - select the store that you want to add to the map.
Status - the element status.
Marker - adding a custom marker.
Custom text - adding custom text.

Google Map display settings

Google Api Key - enter your Google Map API Key.
Map Style - select the map display style.
Map Type - select the map display type.
Zoom Level - specify the initial level of the map zoom (from 1 to 17).
Zoom on scroll - enable/disable map zoom on scroll.
Map controls - enable/disable map controls.
Street view - enable/disable street view.
Animation marker - enable/disable animation marker.
Popup - enable/disable popup windows with store information.

TM Header Account 2.0.0

This module displays login and registration forms on the website. It can take the following positions: website header, left and right column. The module allows to log in and register using such social networks as Facebook, Google+ and VK, which is convenient for website users. Registration or logging in proceeds without reloading the page.

TM Header Account Main Panel

The main panel. Here you can set up the module.

Settings

There are the following settings in the module:

Display type - this setting allows to select the way to display the registration form. It can take the following values:
- Drop down - the form will display as a drop-down below the button opening it.
- Popup - the form will appear in a pop-up.
- Left side - the form will appear from the left as a sidebar.
- Right side - the form will appear from the right as a sidebar.
Display style after login - this setting allows to change the form view after login/registration. You can use the following values:
- Two columns - the list is divided into two columns.
- One Column - the list of links is displayed as one column.
Default avatar - this field appears only if the 'Display avatar' option is enabled. Here you can select the default user avatar.
Display avatar - this setting allows to enable or disable user avatar. If the user logs in to the account on the website with the help of one of the social networks, the avatar will be taken from the account in this social network, otherwise, the avatar, loaded by the website admin, will be displayed.
Use redirect - if this setting is enabled, user registration and password recovery will take place on the default PrestaShop registration/password recovery page.
Use Facebook Login - this setting allows to enable user registration and login with the help of Facebook social network. When you enable this option, you will see the following settings:
- App ID - your account App ID from the Facebook developer account.
- App Secret - your app secret from the Facebook developer account.
Use Google Login - this setting allows to enable user login and registration with the help of Google+ social network. If you enable this option, you will see the following settings:
- App ID - your App id from the Google developer account.
- App Secret - your App secret from the Google developer account.
- Redirect URIs - your online-store url + index.php?fc=module&module=tmheaderaccount&controller=googlelogin
Use VK Login - this setting allows to enable user registration and login with the help of VK social network. If you enable this option, you will see the following settings:
- App ID - your App id from your VK developer account.
- App Secret - App secret from your VK developer account.
- Redirect URIs - your online-store url + index.php?fc=module&module=tmheaderaccount&controller=vk

Registering apps in social networks:

Facebook - to get App ID and App Secret, register your app at http://developers.facebook.com/apps.
Google+ - to get App ID and App Secret, register your app at http://developers.google.com/accounts/docs/OAuth2/.
VK - to get App ID and App Secret register your app at http://vk.com/dev.

TM Homepage Category Gallery

The module displays a category gallery on your store Homepage.

It should look something like this:

Here are the main parts of the Category Gallery item, which are marked on the screenshot:

1 - HTML content
2 - category name
3 - category description
4 - button

Customization details you can find below in 'Module configuration' section.

Module Installation

The module can be installed and deleted like any other PrestaShop module.

Module configuration

After you have installed TM Homepage Category Gallery module, you can configure it clicking the corresponding button (1).
On the Configuration page you'll see the list of items in this module. You can edit the existing ones (1) or add new item (2).

Adding/Editing item options

Please note: category name, description and image are loaded from the category properties and there's no need to add them manually. To edit these options, go to Admin panel -> Catalog -> Categories -> choose category -> Edit.

When you add new item to the module (or edit the one from the list of items), you have some options to choose. The detailed description of options you can see below the screenshot. After all options are set, click 'Save' button (1).

Select category - here you choose from the dropdown list the category which should be displayed on your page.
Specific class - the specific class can be added to the module item.
Display name - option to show or hide the category name.
Category name length - maximum number of symbols to be displayed in the category name. If the name is longer - the '..' symbol will be added after the number of symbols that has been set.
Display description - option to show or hide the category description.
Description length - maximum number of symbols to be displayed in the decription. If the decription is longer - the '..' symbol will be added after the number of symbols that has been set.
Sort order - the order of item in the category gallery.
Display button - the option to show or hide the button 'Shop now' (button text can be different depending on the template).
Status - the option to show or hide the category
HTML content - the field where some HTML content can be added.

TM Homepage Products Carousel

The module adds a carousel to the main page tabs.

Installation and Deleting

The module can be installed and deleted like any other PrestaShop module.

Module configuration

The installed module settings can be configured on the module configuration page.

Use carousel

enable/disable carousel
Number of elements to display

the number of items to display
Items scroll

the number of items to scroll
Item Width

width of an item in the carousel list
Item Margin

margin between items in the carousel list
Carousel speed

item transition duration
Pause

the amount of time between each auto transition (if the "Auto scroll" option is enabled)
Auto scroll

enable carousel auto scroll
Random

start carousel from a random item
Carousel loop

carousel returns back to the beginning when all elements have been scrolled
Hide control on end

hide the navigation (next/previous) buttons on last slide
Pager

show pagination
Control

show next/previous buttons
Auto control

show play/pause buttons
Auto hover

pause the carousel when mouse hovers over carousel items

TM HTML Content

This module allows to display any content (image, HTML, links, etc.) in the following positions: displayNav, home, top, topColumn, left and right (displayLeftColumn/displayRightColumn), footer. It is used to expand design opportunities and add advertisement/information blocks to your store. It is a multilanguage module and can also work in the multistore website.

Installation and Deleting

The module can be installed and deleted like any other PrestaShop module.

Module configuration

After the module has been successfully installed, open the configuration page.

To add the content, you should follow the steps below:

Click 'Add new' button.
The list of available languages. You can view the available elements for all languages by switching the language tabs.
The list of elements added for specific position and language.

Adding the element. Click Add item button and fill in the required settings (none of the fields are mandatory).

All elements of one language added to the same position will be displayed as a list at the backend and frontend.

Language

select the required language from the drop-down list.
Title

title of the element.
Use title in front

display the title of the element at the frontend (the title will show up in front of the element).
Hook

position where the element is added.
Specific class

custom class, defines item styling (CSS class).
Image

upload the image from your computer.
Image width

image width shown at the frontend.
Image height

image height shown at the frontend.
URL

add the link (the whole block will be wrapped in the link).
Target blank

open link in new tab.
HTML

HTML code (except the link if you have added it in the URL field) or text.
Save

click to save the element.

Editing and removing the element

When you add the element, it shows up in the corresponding list.

The language where the elements were added.
Position where the elements were added.
Edit button with the drop-down list.
Delete button.

Editing

Click Edit button to modify the element.

In the appeared screen change all the required fields.

Enable

display the element at the frontend.
Image title

title of the element.
Use title in front

show up title at the frontend.
Hook to which the image should be attached

position of the element.
Specific class

custom CSS class.
Load your image

image of the element.
Image width

image width at the frontend.
Image height

image height at the frontend.
Target link

assign link to the element.
Open link in a new tab/page

Open link in new tab.
Optional HTML code

edit HTML code.
Save

save changes.

Changing order of elements in the list

To change the order of elements, you should just drag the element to the position you need.

TM Look Book

Requirements:

This module allows to create lookbooks and combine them to collections. In their turn, lookbooks allow to view the products directly on the model. Also, if a product is marked in the lookbook, the module displays the lookbook link on the product page.

PHP 5.4+
PrestaShop 1.7

TM Look Book Main panel

On the main page of the module, you can delete and edit the module collections. Also, you can add, delete and edit blocks, that the module will display on the Homepage.

Adding and editing the collection

Collections allow to combine several lookbooks on one page. To add a collection, follow the next steps.

In the collections table (the main module panel) click on the plus (1).
You will see a form with the next fields:
- Status - this option allows to disable or enable the collection display on the collections page.
- Name - the name of the collection that will be displayed on the collections page.
- Description - the collection description.
- Image - the main collection image.
- Template - the template for the lookbooks of this collection. When you select a template, you select the way the lookbooks of this collection will be displayed on the page.
After having filled all the fields, press the 'Save' (2) button.
The collection has been created. You can edit it by pressing the 'Edit' (3) button, or you can proceed to the next step and create lookbooks for the collection.

Creating and editing lookbooks

After creating a lookbook, press the 'View' (1) button next to the needed collection.
In the appeared block press the '+' button (2).
You'll see a form with the following options:
- Status - the lookbook status, the option defines whether the lookbook will be displayed.
- Name - the name of the look.
- Description - the description of the look.
- Image - the main image of the look, here you can mark the products and descriptions.
After filling in all the fields, press the 'Save & Stay' (3) button to continue creating hotspots.

Adding and Editing Hotspots

After having saved the lookbook, you can add the hotspots.

Press the image (in the needed point) (1) in the lookbook form.
You will see a form with the following settings:
- Type - this is the point type, it has two values 'Product' and 'Content'. The product type allows to select a product that will be attached to the point, and content type allows to add content (name, description, html) to the point.
- Product - selecting a product for the point. It appears, if the selected type is 'Product'.
- Name - the name attached to the point. This field is available, only if the type 'Content' is selected.
- Description - the point description or coding. Available only if the type 'Content' is selected.
After having selected the needed options, press the 'Save' (2) button, hotspot will be created and displayed on the page.

Deleting a hotspot

To delete a point, hover over it (1).
You'll see a button with a cross, press it (2).
The point is deleted.

Changing the hotspot position

To change the point position, drag and drop it to the needed position.

Available positions of the module

The module can be displayed in 4 positions:
- Displaybeforebodyclosingtag - display module at the bottom of the page;
- Displayhome - display the module on the home page;
- Displayproductadditionalinfo - the hook adds the additional information on the product page;
- Displaytopcolumn - display module at the top of the page.

Adding a new block

To add a new block, enter the module main panel, choose the tab with the needed hook (1) and click the '+' (2).
In the appeared form, set up the following options:
- Status - the block status. This setting allows to enable or disable the block display.
- Type - allows to select the block type.
- Page - allows to select a previously selected page.
After setting up all options, press the 'Save' (2) button.

After the new block is created, it will be displayed on the Homepage.

TM Manufacturers Block

This module shows up manufacturers available in your store. The list of manufacturers may consist of image and title. The list can also show up as a carousel.

Installing and Deleting

The module is installed and deleted like any other Prestashop module.

Module configuration

After installation you can change its settings on the module configuration page.

Order by

type of sorting items of the block.
Display name

show the manufacturer's name.
Display image

show the image of the manufacturer.
Number of elements to display

type the number of elements displayed in the module.
Image Type

select the image type (you can select the image from the images related to the manufacturer).
Use carousel

show up the list as a carousel.
* Visible items

number of visible manufacturers.
* Items scroll

number of manufacturers shown in one carousel scroll.
* Slide Width

the width of the element in the carousel.
* Slide Margin

the margin of the element in the carousel.
* Auto scroll

automatic scrolling.
* Carousel speed

speed of the carousel.
* Pause

pause between scrolls (if "Auto scroll" is enabled).
* Random

carousel start from the random element.
* Carousel loop

carousel returns back to the beginning when all elements have been scrolled.
* Hide control on end

hide next/previous buttons.
* Pager

show pagination.
* Control

show next/previous buttons.
* Auto control

show play/pause buttons.
* Auto hover

pausing when hovering over carousel elements.

* - settings are available only if carousel is enabled.

After all options have been set, press 'Save' button (1).

The module supports multi-stores.

TM Media Parallax 2.0.0

This module is designed to let you add parallax effect to the DOM items of the page. It allows you to create multi-layered parallax. It also provides a possibility to add a custom background video (you can upload it from your computer to server) or add a YouTube video.

TM Media Parallax Main Panel

Main module panel that allows you to add, edit or remove parallax items.

Creating a new parallax item

In order to create a new parallax item, press 'plus' (1) icon, in the top right corner of the main panel.

Then you will see the following form.

Form options for adding parallax items

Selector - CSS selector of the item with parallax effect applied. For example, '#header .nav'
Item status - item status (parallax will not be displayed if it's disabled)
Speed - digit value from 0 to 2, which defines main parallax block speed
Offset - main layer indent on the Y axis
Inverse - parallax direction
Fade - this option allows to configure main block fade-out on page scroll
Forced full width - forced full width of the parallax block

Press 'Save' after filling in all the required fields.

Parallax layers list

In order to see the list of parallax layers, you should press 'View' (1) near the main parallax item.

Then you'll see a table, in which the layers are displayed after they are added.

Adding new layer

In order to create a new parallax layer, press 'plus' (1) icon in the top right corner of the layers panel.

Then you will see the following form.

Press 'Save' after filling in all the required fields.

Parallax layers types and their fields

Image-background - image used as a parallax background
- Item status - item status (parallax will not be displayed if it's disabled)
- Layout speed - digit value from 0 to 2, which defines main parallax block speed
- Offset - main layer indent on the Y axis
- Inverse - parallax direction
- Fade - this option allows to configure main block fade-out on page scroll
- Image - link to an image, to which parallax effect will be applied
- Sort order - layout position, relative to the rest of items
Video-background - video used as a parallax background
- Item status - item status (parallax will not be displayed if it's disabled)
- Layout speed - digit value from 0 to 2, which defines main parallax block speed
- Offset - main layer indent on the Y axis
- Inverse - parallax direction
- Fade - this option allows to configure main block fade-out on page scroll
- Image - link to an additional image
- Video parallax mp4 - video in mp4 format
- Video parallax webm - video in webm format
- Sort order - layout position, relative to the rest of items
Text - text layer which position can be defined with CSS
- Item status - item status (parallax will not be displayed if it's disabled)
- Layout speed - digit value from 0 to 2, which defines main parallax block speed
- Offset - main layer indent on the Y axis
- Inverse - parallax direction
- Fade - this option allows to configure main block fade-out on page scroll
- Content - layer content
- Specific class - custom CSS class for this layer
- Sort order - layout position, relative to the rest of items
Youtube-background - YouTube video used as a parallax background
- Item status - item status (parallax will not be displayed if it's disabled)
- Layout speed - digit value from 0 to 2, which defines main parallax block speed
- Offset - main layer indent on the Y axis
- Inverse - parallax direction
- Fade - this option allows to configure main block fade-out on page scroll
- Video id - YouTube video ID
- Sort order - layout position, relative to the rest of items
Image - image layer which position can be defined with CSS
- Item status - item status (parallax will not be displayed if it's disabled)
- Layout speed - digit value from 0 to 2, which defines main parallax block speed
- Offset - main layer indent on the Y axis
- Inverse - parallax direction
- Fade - this option allows to configure main block fade-out on page scroll
- Image - link to an image, to which parallax effect will be applied
- Specific class - custom CSS class for this layer
- Sort order - layout position, relative to the rest of items

Uploading video and images to server

In order to upload video or an image to server via File Manager, first you need to press 'file' (1) icon next to the needed field.

In the following window, in the 'actions' line, choose 'upload' (2).

Then you'll see one more pop-up window, to upload image or video file here.

Warnings and recommendations

Mobile devices (smartphones, tablets) have parallax effect disabled by default, the uppermost block image layer is used as a background instead
Forced full width of the parallax block affects page loading speed more critically than a regular fullwidth block loading
The smaller the size of the uploaded video, the better.

TM Mega Layout 1.1.0

This module is designed to allow creating custom layouts (presets) for hooks and displaying them at site instead of the default positions. This module advantage is allowing you to create different hook markups and modify them up to your needs.

Functional characteristics and features of the module

Requirements:
- PrestaShop 1.6+
- PHP 5.4+
Features:
- Module includes 5 hooks: 'Header', 'Top Column', 'Home', 'Footer' and 'Product Footer'.
- In case module is not present in the hook, it can't be added to the preset.
- Module can be displayed in the preset only once, the same as in a hook.
- Module position in 'Modules and Services -> Positions' section does not affect the preset.
- The module does not allow you to configure different modules. You cannot set different modules configuration for various presets.

Module provides you with an option for changing module position and setting up the grid for 3 hooks: displayTopColumn, displayHome, displayFooter. Changing the modules position in 'Modules and Services -> Positions' section will not affect the modules position in the preset. In case the module was not added to the hook, it can't be added to the preset either.

Hooks

The module has 5 hooks available by default:

'Header' is a hook that combines 2 standard hooks: displayNav and displayTop. This hook corresponds to the website header.
'Top Column' corresponds to the original displayTopColumn hook. This hook comes right after the Header hook.
'Home' corresponds to the original displayHome hook. This hook is present only on the main page.
'Footer' corresponds to the original displayFooter hook.
'Product Footer' corresponds to the original displayFooterProduct hook, which is displayed in product page footer.

TM Mega Layout Main Panel

Main Layouts

The main TM Mega Layout module configuration panel that allows you to add a preset to the required hook and configure the preset.

Adding the preset

Press '+ Add Preset' (1) in the needed tab.
Next, fill in the 'Enter layout name' field in the popup typing the new preset (2) title there and press 'Save' (3).
Preset was successfully created, it's listed among the available presets (4) now. Newly created preset is selected for editing (5).

Preset activation

First of all, select the needed preset from the list (1).
Press the 'Use as default' (2) switcher.
The preset was activated. If you need to display this preset only on some pages, open the dropdown (3) and select the pages you need. To apply changes, click outside the list area. A preset that is displayed on all pages will be marked with a filled star in the presets list, and the one that is displayed only on some pages will be marked with a partially filled star.

Removing the preset

There is no option to restore the preset after removing.

In order to remove the preset, choose the required preset among the list (1).
Next, press a cart (2) near the preset title.
Preset was successfully removed.

Renaming the preset

In order to rename the preset, choose the required preset among the list (1).
Next, press a pencil icon (2) next to the preset title.
Specify the new preset title (3) in a popup and press 'Rename layout' (4).
Preset was successfully renamed.

Wrapper

Wrapper has no class by default, it's not a mandatory item.

Adding the wrapper

In order to create a wrapper, press '+ Add wrapper' (1).
Wrapper was added (2).

Adding the custom CSS class to the wrapper

Adding the custom class will let you create a specific styling for your wrapper by using CSS rules.

In order to add wrapper class, press the button (1).
You'll see a pop-up window, fill in the 'Enter wrapper classes' (2) field there and press a 'Confirm' (3) button.
Custom class was added successfully.

Deleting the wrapper

Deleting the preset item will also cause all of its child items and their styles removing.

In order to remove the wrapper, press the cart button (1).
Wrapper was removed successfully.

Styling the wrapper

In order to add custom styles to the wrapper, press the 'pencil' (1) icon in the wrapper block.
In the following pop-up window fill in all the needed fields (you may refer to the documentation 'Styling' section), and press 'Save' (2) button.
If all of the fields are filled in correctly, styles will be saved.

Row

Row item from the Bootstrap grid. It's a required item.

Adding the row

In order to insert a new row, press '+ Add row' (1) into the wrapper block, or '+ Add row' (2) in the main preset block, or '+ Add row' (3) in the column dropdown list.
The row was added successfully.

Adding custom CSS class to the row

Custom class adding allows you to create custom row styling using CSS rules.

In order to add the class to the row, you should press the 'ellipsis' button (1).
Choose the 'Edit row' (2) in a dropdown list.
Fill in the 'Enter row classes' (3) field in the pop-up window and press 'Confirm' (4) button.
Custom class was added successfully.

Deleting the row

Removal of preset item will also cause removal of its child items and their styles.

In order to remove the row, open the menu (the 'ellipsis' icon) in the row block.
Choose 'Delete' (2) option in the dropdown.
The row was successfully removed.

Adding styles to the row

In order to add row styles, open the menu (the 'ellipsis' icon) (1) in a row block.
Press 'Stylize' (2) in the dropdown.
You will see the pop-up window, fill in all the needed fields there (you may refer to the documentation 'Styling' section) and press 'Save' (3) button.
If all of the fields are filled in correctly, styles will be saved.

Column

It is an item with configurable block width for different dimensions, based on Bootstrap grid.

Adding the column

In order to insert a column into a needed 'row', open the menu (the 'ellipsis' icon) (1)
Choose the '+ Add Col' (2) among the list.
Fill in the fields (col-xs*, col-sm*, col-md*, col-lg - bootstrap classes) in the pop-up window and press 'Confirm' (3) button.
The column was added successfully.

Removing the column

Preset item removing will also cause its child items and their styles deleting.

In order to remove the column, open the menu (the 'ellipsis' icon) in a column block (1)
Press 'Delete' (2) in the list.
The column and all of its child items were removed.

Editing the column

In order to edit the column, open the menu (the 'ellipsis' icon) (1) in the column block.
Press 'Edit column' (2) in the list.
Fill in the fields (col-xs*, col-sm*, col-md*, col-lg - bootstrap classes) in the pop-up window and press 'Confirm'.
The column was successfully edited.

Adding styles to the column

In order to add column styles, open the menu (the 'ellipsis' icon) (1) in a column block.
Press 'Stylize' (2) in the list of options.
You will see the pop-up window, fill in all the needed fields there (you may refer to the documentation 'Styling' section) and press 'Save' (3) button.
If all of the fields are filled in correctly, styles will be saved.

Module

Module assigned to this hook.

Adding the module

Be careful when adding modules to the preset, some of the modules are desirable to use if they do not change the visible layout, e.g., 'Data mining for statistics' module.

In order to add the module to the preset in a column block, open the menu (the 'ellipsis' icon) (1).
Press the '+ Add Module' (2) in the list of options available.
If needed, you can enter the custom class (3) in the pop-up window and select the module (4), next press 'Confirm' (5).
The module was successfully added.
In this version of TM Mega Layout you can add 'Homepage tabs' module in Home hook.

It can also be customized like all other modules in Mega Layout.

Deleting the module

Removal of preset item will also cause removal of its child items and their styles.

In order to remove the module, open the menu (the 'ellipsis' icon) (1) in the module block.
Press 'Delete' (2) in the list of options available.
The module is removed.

Adding custom class to the module

Custom class adding allows to create module styling using CSS rules.

In order to specify custom class for the module, open the menu in the module block (the 'ellipsis' icon) (1).
Press 'Edit Settings' (2) then.
Specify custom class (3) in the pop-up window and press 'Confirm' (4) button.
Custom class was added.

Logo, Copyright

Logo and Copyright blocks are edited the same way as modules, except for the fact that Logo can be placed only in Header or Footer position, and the Copyright block can be placed only in Footer position.

Product Page

Product Info tab

By means of this tab you can switch the layouts of product page. It will appear in the admin panel after making some simple actions described below.

Creating layout

Layouts are created and edited manually.

Create folder 'product_pages' in your theme folder.
In theme folder find the file 'product.tpl', copy it to the created folder 'product_pages' and rename to 'default.tpl'. To create several layouts - duplicate this file, rename it (e.g. 'layout_1.tpl', 'layout_2.tpl') and change the structure according to your needs.
Create file 'config.json' in this folder. Copy the following code into it:
```
{
  "default": {
    "name": "Default",
    "preview": "default.jpg",
    "default": 1
  }
}
```
- "default" - name of .tpl file containing the product page structure.
- "name": "Default" - title of product page layout in module settings.
- "preview": "default.jpg" - preview picture of product page layout in module settings; image should be located in 'product_pages' folder.
- "default": 1 - set to '1' if the layout should be set as default
  
  One of the layouts should contain '1' value to be set as default.
This code should be duplicated for each created layout, and contain corresponding values. For example:
```
{
  "default": {
    "name": "Default",
    "preview": "default.jpg",
    "default": 0
  },
  "layout_1": {
    "name": "Layout 1",
    "preview": "layout_1.jpg",
    "default": 0
  },
  "layout_2": {
    "name": "Layout 2",
    "preview": "layout_2.jpg",
    "default": 1
  }
}
```

Open the 'product.tpl' file in the theme folder. Delete everything and paste the following code:

{include file="$tpl_dir./errors.tpl"}
{if $errors|@count == 0}
  {if isset($megalayoutProductInfoPage) && $megalayoutProductInfoPage}
    {assign var='path' value="./product_pages/`$megalayoutProductInfoPage`"}
    {include file=$path}
  {else}
    {include file='./product_pages/default.tpl'}
  {/if}
{/if}

To add/edit styles of any product page layout, go to your_theme_folder/css/ and add new folder 'product_pages'. In this folder create file with the layout name and .css extension (e.g. 'default.css', 'layout_1.css', 'layout_2.css'). These files should contain styles of the corresponding product page layout.
To add scripts to any product page layout, go to your_theme_folder/js/ and add new folder 'product_pages'. In this folder create file with the layout name and .js extension (e.g. 'default.js', 'layout_1.js', 'layout_2.js'). These files should contain scripts of the corresponding product page layout.

Switching layouts

Select 'Product Page' from the dropdown list (1) and click the 'Product Info' tab (2).

In this tab you can switch the layouts of product page. The layout image with the gray border is set as default.

Presets export

Export tool allows you to export presets for the further import into different shops.

Navigate to the 'Tools' (1) tab in the main configurations panel.
Choose 'Export' (2) in the form.
You'll see the list of the existing presets in site hooks.
In order to preview the preset, press 'Layout preview' (3) button next to the preset you need, in order to export, please press 'Export layout' (4) button.
Then you'll be able to download this preset as a zip archive.

Preset import

Import tool accepts only the presets *.zip files that were previously generated with the same module Export tool.

In order to import your preset, you should open the Tools (1) tab and choose 'Import' (2).
Next, press the Add file (3) button and select the zip file of your exported preset. In case this archive is the exported preset, you will see this preset preview.
If this preset meets your needs, press 'Import' (4). The preset will be imported and added to the list of available presets.

Reset

'Reset' reverts all the presets to initial state (to the way they came with the template), and discards all the created presets.

Attention! After reverting presets to default state, all the custom presets will be discarded!

To reset presets, navigate to the 'Tools' (1) tab. In the appeared block open the 'Options' (2) tab.
Press the 'Reset' button.
That's it! All presets are reset to initial state.

Styles and Scripts Optimization

Styles and scripts optimization adds exclusions for modules in Header section, based on their use in presets. This allows speeding up the page loading speed. Optimization works in test mode.

Enabling optimization:

To enable optimization, open the 'Tools' (1) tab and select the 'Options' (2) tab.
In the appeared window, you can enable optimization (3).

If optimization is enabled when editing and enabling presets, optimization gets discarded, but you'll see a window offering to run optimization. There is no need to optimize scripts and styles every time you change presets. It's better to optimize them when you're done editing.

Styling

Background styles. Fields description:
- background-image (background image) - the image URL or 'none' value. The image is picked from the ~/images/cms/ folder.
- background-color (background color) - the value can be set in any color format (rgb, hex, etc.). You can choose the color using the colorpicker tool.
- background-repeat (background repeat) - all of the available options are listed in the radio buttons.
- background-position (background position) - all of the available options are listed in the dropdown.
- background-size (background size) - all of the available options are listed in the dropdown.
- background-origin (background image positioning region) - all of the available options are listed in the dropdown.
Border styles.
- border-top-style, border-right-style, border-left-style, border-bottom-style (border styles) - all of the available options are listed in the dropdown.
- border-top-width, border-right-width, border-left-width, border-bottom-width (borders width) - should be set in pixels.
- border-top-сolor, border-right-color, border-left-color, border-bottom-color (borders color) - the value can be set in any color format (rgb, hex, etc.). You can choose the color using the colorpicker tool.
- border-top-right-radius, border-top-left-radius, border-bottom-right-radius, border-bottom-left-radius (border radius) - should be set in pixels.
Other styles.
- box-shadow (box shadow) - example:0px 0px 0px 0px rgba(0,0,0,0.75).

Items styles removing

In order to remove items styles, open the items styling section and press 'Clear styles' (1)

Warnings

If the following message appears in the module item block, you should enable the mentioned module.

If the following message appears in the module item block, you should install the mentioned module.

In case you remove or deactivate the 'TM Mega Layout' module, all of the active presets will be disabled and you will see the positions (hooks) in their original appearance.

TM Mega Menu

The module is designed to create complex menus. The module provides the ability to display one item (without sub-menu), a menu item with a sub-menu and a menu item with sub-menu by means of a multi-row and multi-column block. The module can be used in different positions, but it will display the same content. Available positions: top (displayTop), left (displayLeftColumn), right (displayRightColumn), footer (displayFooter). You can add categories (with subcategories), CMS categories (with subcategories), manufacturers (one or a list), suppliers (one or a list), stores (if multistore is used), links to any product, information block about the product, custom links (not limited in quantity), custom HTML blocks (not limited in number) and banners. See below for more details.

The module includes 6 main tabs that allow to customize the menu.

TM Mega Menu Items

TM Mega Menu items are the basic items which appears in the menu.

In order to create a new item, open the TM Mega Menu module and click Add item button from the top menu or click "+" button in the top right of the table.

In the form that appears, fill in the required fields.

Enter item name

the tab title which is mandatory to be filled in for the default language, if the additional languages fields are not filled in, the tab takes its name from the default language.
Active

active/inactive tab.
Link

a link that is assigned to this tab. You can enter a custom link, or choose from existing options (categories, CMS categories). If you leave the field blank, the link of this tab is inactive.
Sort order

the order of tabs to be displayed.
Specific Class

the class which is added to emphasize the item (CSS class).
Enter item badge

is filled in depending on multi-languages.
It is Mega Menu

given tab sub-menu is a Mega Menu. *
Use simple menu

given tab sub-menu is a simple menu. **

* It is Mega Menu. If this option is selected, there will be a form to create a complex menu (Mega Menu).

** Use simple menu. If this option is selected, there will be a form to create a simple menu. This is a menu that displays the selected content in a single column. If the menu has embedded content, the new column is added.

Complex menu consists of rows and columns in rows.

The Row is a part of the Mega Menu structure. It includes the menu columns. The existing row can be removed by clicking the appropriate button. The row will be removed with the content it includes. The rows quantity is not limited.

The Column is a part of the Mega Menu structure, which is placed inside the rows. (The Class) The width of the column cannot be less than 2 and more than 12. In order to make the menu display properly, the total column width cannot exceed 12. The width (class) is a Bootstrap column type, corresponds to the same values.

In order to create the menu, click the 'Add row' button.

In the form appeared, click 'Add column' button.

In the pop up window you need to specify the column class (from 2 to 12). The column itself appears next where you need to set the required settings.

Here you can change the column class, CSS class and the content from the list provided. You can add/remove content by double clicking the item, or by highlighting the items and clicking the corresponding button.

Block can be removed by clicking 'Remove block' button in the footer of the block.

By removing the row, the included columns are also removed.

In order to move the content available in the selected menu, double-click or highlight the desired content and press the corresponding button.

Inactive menu information is saved while switching between menu types and you can always change the type of menu.

TM Mega Menu HTML

In this section we will explain how to create a custom HTML block in the Mega Menu.

The module has a table listing all the available blocks. You can also add a new block by clicking the '+' button in the top right of the table.

In the form that appears, fill in the required fields.

Enter HTML item name

HTML block name, is mandatory to be filled in for the default language.
Specific class

block's CSS class.
HTML content

HTML content.

Added block will appear in the list of blocks, as well as in the list of available content while creating menu blocks.

TM Mega Menu Links

In this section we will show how to create custom links in the Mega Menu.

The module has a table listing all the available links. You can also add a new link by clicking the '+' button in the top right of the table.

In the form that appears, fill in the required fields.

Enter Link name

link name, is mandatory to be filled in for the default language.
Enter Link URL

link URL, is mandatory to be filled in for the default language.
Specific class

block's CSS class.
Open in new window

open link in a new window.

Added link will appear in the list of links, as well as in the list of available content while creating menu blocks.

TM Mega Menu Banners

In this section we will explain how to create banners in the Mega Menu.

The module has a table listing all the available banners. You can also add a new banner by clicking the '+' button in the top right of the table.

In the form that appears, fill in the required fields.

Select a file

select a file, is mandatory to be filled in for the default language.
Enter Banner name

banner title, is mandatory to be filled in for the default language.
Enter Banner URL

link URL, is mandatory to be filled in for the default language.
Specific class

block's CSS class.
Public Title

public banner title.
Description

set the description of the banner.
Open in new window

open link in a new window.

Added banner will appear in the list of banners, as well as in the list of available content while creating menu blocks.

TM Mega Menu Video

In this section we will explain how to add a video in the Mega Menu.

The module has a table listing all the available videos. You can also add a new video by clicking the '+' button in the top right of the table.

In the form that appears, fill in the required fields.

Enter Video Name

video title (the field is required).
Enter Video URL - add video link in the formats described below:
- If this is a YouTube video, click on Embed and copy the code between the quotes for http://www.youtube.com/embed/video_id
- If this is a Vimeo video, click on Share icon and in the Embed section copy the source code between the quotes for http://player.vimeo.com/video/video_id

Added video will appear in the list of videos, as well as in the list of available content while creating menu blocks.

TM Mega Menu Map

In this section we will explain how to add a map in the Mega Menu.

The module has a table listing all the available maps. You can also add a new map by clicking the '+' button in the top right of the table.

In the form that appears, fill in the required fields.

Enter Map item name

the title of the map.
Enter Map latitude

set a latitude value.
Enter Map longitude

set a longitude value.
Marker

adding a custom marker.
Enter Map scale

the scale of the map (used 8 by default).
Map description

set the description of the map.

Added map will appear in the list of maps, as well as in the list of available content while creating menu blocks.

TM Mosaic Products

This module allows you to display categories with products, banners, video (Youtube, Vimeo and custom video), HTML content, various sliders with different number of slides and dimensions in any row on the site home page.

Installation and Deleting

The module is installed and deleted like any other PrestaShop module.

Module settings

After module has been installed, you can add the required blocks with category products, previously added banners, video and HTML content.

Adding/removing/editing Blocks

In order to add a new category, press the "Add new" button.

Select category - choose a category to add products, banners, video and HTML content to.
Use custom name - custom category status.
Custom name - category title.
Status - item status.

In order to add the new row, press the "Add row" button. Then choose one of the eight layouts presented in the following window.

In order to add the layout, click on one of the eight options to pick it, and it will be added to the form.

In order to add items, click on one of the layout cells. You'll see five buttons listing the available items of certain type.

After pressing one of the buttons you will see the form to pick the item of chosen type.

After clicking on one of the items, it will be added to the layout cell. You can fill in the layout with different blocks this way.

After saving the category with chosen layouts, it will show up in the form of the added categories.

In order to remove the item, press the 'Delete' button.

Banner adding/removing/editing

In order to add a new banner, click the 'Add new banner' button. Next, fill in the required fields in the form that appears.

Select a file - choose a file, this field is required (at least for the default language).
Title - banner title, this field is required (at least for the default language).
Url - link path, this field is required (at least for the default language).
Description - banner description (at least for the default language).
Specific class - block's CSS class.

Adding/removing/editing Video

In order to add a new video, click the 'Add new video' button. Next, fill in the required fields in the form that appears.

Enter Video name - video title, this field is required (at least for the default language).
Video Link/Path - link to the video (youtube, vimeo or custom video), this field is required (at least for the default language).
Allow autoplay - defines if video starts automatically right after the player has been loaded.
Allow controls - defines if player controls are displayed.
Loop - defines if the video playback is in the infinite loop.

In order to add custom video, press the 'file' button. Next, you'll be able to add a video via file manager.

Adding/removing/editing HTML content

In order to add new HTML content, press the 'Add new HTML' button. Next, fill in the required fields in the form that appears.

Enter HTML item name - HTML content title, this field is required (at least for the default language).
Specific class - block's CSS class.
HTML content - the content.

Adding/removing/editing Slider

In order to add a new slider, press the 'Add new slider' button. Next, fill in the required fields in the form that appears.

Enter Slider item name - slider title, this field is required (at least for the default language).
Control - show/hide slider navigation.
Pager - show/hide slider pagination.
Auto scroll - turns on/off slider autoplay.
Specific class - block's CSS class.
Carousel speed - slides transition duration (in ms), this field is required.
Pause - the period between slides switching (in ms), this field is required.

Adding/removing/editing Slides

In order to add a new slide, click the 'View' button in the slider form and then press the 'Add new' button in a window that appears. Then fill in the required fields.

Type - choose the slide type, this field is required.
Banner/Video/Html list - choose the element of the previously selected type, this field is required.
Sort order - slide position.
Item status - status of the element.

TM Newsletter

The module displays a notification with a proposal to subscribe to store newsletter in a pop-up window. The email check can be enabled in module settings by means of confirmation email. You can also adjust the timeout between reminders for registered and non-registered users. Registered users can permanently give up on reminders.

Module install/uninstall

This module can be installed/uninstalled as any other PrestaShop module.

Module settings

After module has been installed you can configure it on the module configuration page.

Live mode - enable/disable the module.
Would you like to send a verification email after subscription? - enable/disable confirmation email send.
Timeout for guests - set timeout for popup reminding subscription for guests.
Timeout for customers - set timeout for popup reminding subscription for customers.

It is necessary to install and enable 'Newsletter block' for proper work of module.

TM Olark Chat

Module to display Olark Chat on your store front-end.

Module install/uninstall

This module can be installed/uninstalled as any other PrestaShop module.

Module settings

After module has been installed you can configure it on the module configuration page.

In order to configure Olark Chat, which you can see on the live demo of the template, you need to register on the official website and to get the ID for your website. Input your ID to the field "Olark site ID" and set module under "Live mode". Now save settings by clicking 'Save' button.

TM One Click Order

Module is used to make the process of making an order much faster and easier than it was before.
It simplifies the procedure from five steps to one and makes it more appealing for the customers who want to save their time while making an order.
By means of this feature you can get more spontaneous purchases that will have a positive impact on your business.

Installation

Navigate to Modules (1) -> Modules and Settings (2) in your admin panel and find the TM One Click Order module (2). Then click the 'Install' button (3).

Module configuration

After the module has been successfully installed, the 'Configure' page with the module settings will be opened.
You'll also see the new menu item 'Quick Orders' (2).

The settings are divided into three tabs - Preorder template (1), Preorder success message (2) and Settings (3).

Preorder template

Here you can add a new field by pressing the corresponding button (1):

Choose the options for the new field and click the 'Save' button (1):
- Type - choose the type of field.
- Specific class - add the custom class for the current field.
- Name - field name.
- Description - field description; appears below the input.
Edit the existing field.

Click on the field you want to edit. The settings are the same as for adding new field.
Delete the fields from the form.
Click the 'Delete' button (1) in the top right corner of the field.

Preorder success message

The tab allows to edit the message for the alert window that appears after the user clicks 'Send' button in quick order form.

Add the text/button you want to be shown and click the 'Save' button (1).

Settings

The tab allows to switch the 'Ajax order' option and the 'Notify the owner' option on and off.

It helps the administrator to see the new quick orders which were submitted while processing the existing orders.

If the 'Ajax order' option is enabled, the additional option 'Ajax order timeout' appears.
The value is set in milliseconds and means the time period between each check for new quick orders.

This option helps to open new preorders without page reloading. To see them in the list of quick orders, click the 'Load new orders' link (1) in Orders -> Quick Orders menu.

Order processing

Navigate to Orders -> Quick Orders (1) in your admin panel.

It has four tabs - New, Created, Removed and Search.

New - new preorders that have been submitted by the customers.

In the left part there's a button to create a new preorder (1) and a list of preorders (2).

In the right side you can see the preorder details (3) divided into tabs (Preorder information, Customer, Languages and currencies, Cart, Vouchers, Addresses, Shipping, Summary).

If the order has just been created, you'll see only three of them - Preorder information, Customer, Languages and currencies.

When you fill in the info about the customer, three more tabs will appear - Cart, Vouchers and Address. When the address info is added, Shipping and Summary tabs will be shown. Tabs where all required information has been successfully added, are colored with green. Yellow colored tabs require some more order details. Blue ones are informational, they are generated automatically.
When the Summary tab appears, there's a button 'Create the order' in Summary tab (1).

After clicking it the preorder will be transferred from 'New' to the 'Created' preorders list (1).

If you need to delete the order, there's a trash sign in the top right corner (1).

Press it and the preorder will be transferred to 'Removed' orders tab.
Created - preorders that have been already processed by the administrator.

Choose the order in the left side and click on it to see the detailed info in the right side.

You can also click the 'Show' link to see full information about the customer (1), about the order (2) and the employee (3).
Removed - preorders that have been cancelled.

The preorder in this tab can still be recovered by clicking the '+' button (1). Then it will be transferred back to 'New' preorders tab.
Search - preorders search. Enter the search (by customer info, employee info, order id, preorder id); you can also enter the specific date/date period when preorders were created.

TM Product Custom Tab

The module serves to create an additional tab on the product page for displaying additional information. The module has an advantage over the existing functionality, due to the ability of adding images, text, video, links, etc.

Installation and removal

The module is installed and removed as any other PrestaShop module.

Module settings

After installing the module, you can add new tabs for the products at the module configuration page, as well as at the product editing page.

Adding tabs through the module configuration:

To add a new tab, press the 'Add new' button (1).

Adding a tab to one or several products of a previously selected category.
- Tab Heading - name of the tab, required.
- Tab Description - information about the tab, can include data in the format of an image, text, video, links, etc.
- Status - the element status.
- Additional settings - enabling/disabling additional settings.
- Select category - choosing categories for which the tab should be displayed.
- Products to display - selecting the products from the previously selected categories.
Adding the tab to the products that belong to selected categories.
To add a tab to all products, disable the 'Additional settings' option.

Changing the tab display position

Drag and drop the needed tab to change its position.

Adding tabs through the product settings:

Navigate to the product page and click the 'TM Product Custom Tab' link in the left menu.

If the 'Additional settings' option is disabled, the tab will be added to the product that was edited earlier. You can also add the tab to the products that belong to selected categories, or you can add it to several products that belong to the previously selected category.

To change the tabs display position, drag-and-drop the blocks. You can edit or remove tabs as well.

TM Product List Gallery 2.0.0

This module displays all the available product images in form of a gallery on product listing pages. Depending on what settings you choose, the module can display images in form of a rollover or slideshow.

Module Installation and Deleting

This module can be installed and deleted like any other PrestaShop module.

Module settings

After the module is installed, navigate to \themes\classic\templates\catalog\_partials\miniatures\product.tpl. Open this file and find the following code:

and replace it with:

After installing and connecting the module, you can set it up on the module configuration page.

The module has the following main settings:

Live mode - ability to use the module in live mode.
Type - select display type: rollover, gallery or slideshow.

If you choose rollover, you can choose the animation effect:

Animation type:

Opacity slide - opacity changes;
Horizontal slide - horizontal;
Vertical slide - vertical.

If you choose gallery, you will find the following settings available:

Display items - the number of items displayed;
Visible items in row - the number of items in a row;
Use carousel - enable/disable the carousel for this block.

If you choose slideshow, you will find the following settings available:

Display items - the number of items displayed;
Use pager - pager display in slide show;
Use controls - controls display in slide show.

TM Product Zoomer

This module is an alternative solution for the standard product image zoom on the single product page. It's fully compatible with the standard additional products thumbnail carousel and product attributes changes. It allows you to choose among the three available options (window/lens/inner) for image zoom with the advanced plugin settings. The module is based on the Elevatezoom Plus plugin.

Installation and removing

The module is installed and deleted like any other Prestashop module.

Module configuration

After the module has been installed you can configure it on the module configuration page.

By default the configuration page shows the simplified set of options.

Live mode - module is on/off.
Fancybox - whether to show the enlarged image in the Fancybox on click.
Change image on hover - switch the main image on thumbnail hover (by default is set to switch on click).
Responsive - allows to the use adaptive functionality for plugin display on the mobile devices.
Zoom Type - choose the type of the enlarged image display mode
- window - the enlarged image shows up next to the main image in one of the available (16) positions
- lens - the image is zoomed in the lens container, on top of it
- inner - the image is zoomed inside of main image container, fully covering it.
The mobile devices (< 768) have "lens" mode activated instantly.
Extended settings - enables advanced settings for the experienced users. You can see the link to the official documentation for more details next to it.

Extended module configuration

Scroll Zoom - zoom ratio change on the mousewheel scroll (available for all types).
Cursor - cursor type on the magnified image hover. The following options are available: default, cursor, crosshair (available for all types).
Zoom settings - available for all types, if the 'Scroll Zoom' is enabled.
- Zoom Level - the zoom level on the initial hover
- Min Zoom Level - a minimum zoom level
- Max Zoom Level - a maximum zoom level
- Scroll Zoom Increment - magnifying scroll increment
Easing - the magnified image appearance effect (available for all types).
- Zoom Easing - effect on/off
- Easing Amount - effect delay value
Image Crossfade - main image blur outside the hover area (the lens) - available for window, lens.
Magnified image window settings - available for window.
- Zoom Window Width - window width in px
- Zoom Window Height - window height in px
- Zoom Window Offset X - window offset on the X axis
- Zoom Window Offset Y - window offset on the Y axis
- Zoom Window Position - window position choice relatively to the main image (the positions available are presented on the image below this field)
- Zoom Window Bg Color - window background image (for transparent images only)
- Zoom Window Fade In - the effect of slowing the window appearance
- Zoom Window Fade Out - the effect of slowing the window disappearance
- Border Size - window border width in px
- Border Color - window border color
Zoom Lens - zoom lens (available for window, lens).
- Zoom Lens - on/off
- Lens Shape - lens type. It can take the following values: circular/rounded or squared/rectangular
- Lens Color - lens inner background color
- Lens Opacity - lens inner background opacity
- Lens Size - lens size in px
- Lens Fade In - the speed of lens appearance effect
- Lens Fade Out - the speed of lens disappearance effect
- Lens Border - lens border width
- Lens Border Color - lens border color
- Contain Lens Zoom - the restriction of the lens overflow outwards the main image container
Tint - the shade effect on the area outside the lens (available for window).
- Tint - effect on/off
- Tint Color - the lens outer area background
- Tint Opacity - the lens outer area opacity
- Tint Fade In - the appearance effect speed
- Tint Fade Out - the disappearance effect speed

If you switch the zoom type, advanced options set is changed accordingly to show only the available parameters for the type selected.

Be careful when editing the extended settings. If the settings are set incorrectly, the effect can be ugly.

TM Products Manager

Introduction

The module is created for managing online shops, especially shops with big amount of products. Using this module you can easily filter your products and make different operations on them.

Installation and removal of the module

The module is installed and removed as any Prestashop module.

Removal or re-installation of the module will not reset the changes you made using it.

When the module has been successfully installed, go to Catalog -> TM Products Manager (1) to see the module's main menu.

Performance

The main module menu is divided into two main parts: 'Choose section' (1) and 'Choose option' (2).

The first part is created in the form of tabs - Information, Price, Associations, Quantity and Extra Pages.

Information - options concerning product availability and description.
Price - price and tax rules settings.
Associations - ability to change brand, category or accessories of several products.
Quantity - changing products' quantity.
Extra Pages - ability to add a new page.

Click each tab to see the available options in this section. They will be described further.
Each option has a hint - short description, which appears in the right when you hover the option (1).
Choose the needed option and click it.
The next step is filtering products. Set the filtering options according to your needs and click the 'Select' button (1). To clear the selected filters click the 'Reset' button (2).

You can also cancel each of the filters after you've selected them. Simply click the cross (1) near the product property value and it will be removed.
Below the filters there's a list of products matching the selected criteria. You can edit it lf you need to delete some of the products from the list. Each product can be removed separately by clicking 'Remove from the list' button (1). To remove all products from the list, click the 'Select all' (2) and 'Remove selected' (3) buttons. If you checked a large number of products and need to uncheck them, click the 'Unselect all' button (4).
When the list of selected products complies with all requirements, click the 'Process' button (1).
Set the option/options according to your needs and click the 'Save' button (1). If you need to make some changes in products list, click 'Back to filter' button (2).

Please note, that you won't be able to undo these changes the same way.

Available options

Information

The section allows to configure the following options:

Enable/Disable products - set the on/off status of your products.
Available for order - make some products available or unavailable for order.
NOTE: if 'Available for order' is set to 'Yes' for the products with hidden prices, their prices will automatically become visible again.
Show price - show or hide product price.
NOTE: if you set 'Show price' to 'No' for the products, which are available for order, they will be automatically changed to unavailable.
Online only - apply the 'Online only' mark to the selected items.
Condition - change the condition of multiple products.
Short description - add a short description which should be applied to all selected products.
Full description - add a description to selected products with an ability to place it before the main description, after it, or replace the whole description with the new one.
Tags - add more tags to the chosen products.

Price

In this section you can change options concerning product price.

Display "On sale" - display the selected items with 'On sale' mark.
Change tax rules - choose the tax rules which will be applied to several products.
Add new specific price - set the special price for selected products with an ability to add the price activation period.

Associations

Here you can change options connected with product relations.

Change brand - change brand of selected items.
Change default category - choose the category which will be set as default for some products.
NOTE: You can choose only one default category. Keep in mind that your current default category will be replaced with the new one.
Change related categories - set the related categories to multiple products with an ability to save or remove old relations.
Add accessories - add the accessories suitable for the chosen products.

Quantity

This option allows to set the product quantity or increase/decrease current quantity by a certain amount.

Change quantity - set the required quantity of some products.

Extra Pages

This option allows to add a new page.

Add new page - create a new product page.

TM Products Slider 2.0.0

Introduction

This module serves for creating galleries, based on product data and displaying them in form of slides on the website frontend. The module supplies 4 methods of displaying the gallery with individual settings and appearance. Each method has pre-defined functionality. Advanced configuration is also available. The module can display an unlimited amount of products with diverse information.

Installation and removal of the module

The module is installed and removed as any default Prestashop module.

After removal or re-installation of the module, all the settings and filters are discarded.

Adding/deleting/editing a slide

Adding a slide

To add a product to the gallery, go to the needed product in the Catalog -> Products section. Then press the 'Edit' button (1) next to the needed product.

In the appeared window for editing information about the product choose Modules tab (1), navigate to the TM Products Slider (2) and click the Configure button.

Mark (3) that you want the product to be displayed in slider. Save changes by pressing 'Save' button (4).

Slide removal

There are two ways of deleting a slide.

To exclude a product from the gallery, navigate to the needed product in Catalog -> Products section. Then press the 'Edit' button (1) next to the needed product.

In the appeared window for editing information about the product choose Modules tab (1), navigate to the TM Products Slider tab (2) and remove the check mark (3) which means that you don't want the product to be displayed in slider. Click the Save button (4):
The second way is to navigate to the module configuration page, find the needed product in the Slides list table and press the Delete button (1) next to it.

Then confirm the deletion.

Slides display order

By default, the slides are displayed in the order they were added. To change the display order, navigate to the module configuration page and drag the slide to the needed place in Slides list table.

Disabling slides

Moreover, you can temporarily disable a slide (for the time period that a product is out of stock or for any other reason) without removing it completely. To do this, navigate to the module configuration page and click a tick next to the needed product (if it's active now) or click crosses (if it's inactive) in the Slides list table:

Gallery types and recommended settings

There are four types of gallery display (standard, list, grid, full width). Each of them can be set up independently and you can switch between them if needed.

By default, the gallery uses the following product image types: large_default - for the main image; medium_default - for thumbnails.

Standard

Recommended settings:

image size (px) - 435*435
Gallery Width - 1170px
Gallery Height - 580px
Extended Settings - off

List

Recommended settings:

image size (px) - 435*520
Gallery Width - 1170px
Gallery Height - 520px
Extended Settings - off

Grid

Recommended settings:

image size (px) - 585*750
Gallery Width - 1170px
Gallery Height - 750px
Extended Settings - off

Full width

Recommended settings:

image size (px) - 435*435
Gallery Width - 1920px
Gallery Height - 450px
Extended Settings - off

Advanced settings

To access extended settings, move the Extended Settings slider to the Yes position.

Gallery Type - active gallery type
Gallery Width - active gallery width
Gallery Height - active gallery height
Extended Settings - advanced settings; if the option is moved to 'No' position, all the advanced settings will be saved and you can restore them at any time. At the same time, at frontend it will be displayed as by default.
Slider Duration - the speed of slide changing
Use navigation - the display of the Prev/Next buttons for slide switching
Use Thumbnails - using thumbnails with additional information about slides as an element for switching the current slide
Use Pagination - using pagination as an element for switching the current slide
Use Image Gallery - using additional product images inside the slides
Allow autoplay - allow automatic slide switching
Slider Interval - the time span, after which the slide will switch to another (available only if 'Allow autoplay' is active)
Allow Loop - allow repeating slides from the beginning after all the slides were shown

After switching the gallery, all the setup of the previously used gallery is saved.

After disabling/enabling advanced settings, the settings are saved and you can go back to them at any time.

FAQ

Why the gallery does not display on the frontend?
I change gallery advanced settings, but I don't see changes on the frontend. What can be done?

Make sure that the gallery has slides, and at least one of them is active.

Make sure that you change settings of the active gallery.

TM Search 1.1.0

This module is an extended search version that allows you to select a specific category for searching within its content. You can also change the category after defining the query. It also provides a possibility to set the additional product information display (description/price/manufacturer, etc.), and define the search results container layout, e.g., you can divide the results into a few sections with the controls (pagination, next/previous/show all). All the module settings are available in main admin panel.

Installation and Deleting

The module is installed and deleted like any other Prestashop module.

Module configuration

After module has been installed you can set it up on the module configuration page.

Enable Ajax Search - enables live search in a dropdown.
Enable Instant Search - enables instant search.
Minimum query length - number of symbols to start the result display.
Number of shown results - number of products that shows up in the results section (number of products per page for the "pager" or "navigation" mode).
Display "Show All" button - displays the 'Show all' button below the results section, the click on it displays all found results.
Display pager - divides results into pages (depends on the 'Number of shown results' field value) and displays links to them.
Display navigation - shows the Previous/Next buttons.
Position of navigation - hook(s), to show the navigation (top/both/bottom options are available).
Highlight query result - highlights the text that matches search query.
Display image in Ajax search - shows product images in the results section.
Display description in Ajax search - shows product description in the results section.
Display prices in Ajax search - shows product price in the results section.
Display reference in Ajax search - shows product reference in the results section.
Display manufacturer in Ajax search - shows product manufacturer in the results section.
Display suppliers in Ajax search - shows product suppliers in the results section.

Some parameters might differ depending on the combination used.

TM Social Feeds

This module loads the social networks feeds on your website. It enables the site visitors to be aware of the latest news and posts shared on the social networks.

Installation and Deleting

The module is installed and deleted like any other Prestashop module.

Module configuration

After installation you can change its settings on the module configuration page.

In the upper form you should add global settings for each social network. Different social networks have different settings.

Twitter

It is enough to add a Widget ID which can be taken from your Twitter account.

Add block to position

display block in specific position.
Select theme

color scheme of the block for this position.
Sort order

sort order (order number of the block in this position).
Widget width

block width in this position.
Widget height

block height in this position.
Widget feeds limit

number of feeds in the block.
Enable header

show block title.
Enable footer

show footer of the block.
Enable border

show border of the block.
Show replies

display replies to the posts.
Show scroll

show block scroll.
Show background

add block background or leave it transparent.

Facebook

Paste the full path to the Facebook page which feeds will be loaded. The page should be public.

Add block to position

display block in specific position.
Select theme

color scheme of the block for this position.
Sort order

sort order (order number of the block in this position).
Widget width

block width in this position.
Widget height

block height in this position.
Enable header

show block title.
Enable border

show footer of the block.
Show faces

show photos of users who liked the page.
Show posts

show posts from the page.

For Pinterest paste the full path to the page which feeds will be loaded.

Add block to position

display block in specific position.
Sort order

sort order (order number of the block in this position).
Widget width

block width in this position.
Widget height

block height in this position.
Widget column width

width of the block column

Instagram

Client ID - a unique ID assigned during widget registration on Instagram.

User Name - username used to link the owner's page.

Selection type: you can set whether the images are loaded from specific user or by tag.

Tag by which images are loaded.

Id of the user whose images will be loaded.

Instagram access token - access token of the user who owns the page.

In the second part of the module configuration page you can add the required module to the position you want. There are 4 positions. You can add the block settings to each position. The only global setting is the data of social networks which feeds will be loaded.

Each social network has its own settings.

Add block to position

display block in specific position.
Sort order

sort order (order number of the block in this position).
Widget feeds limit

number of feeds displayed in the block.

The module supports multi-stores.